Custom Tray Dental Custom Tray Materials: A Practical Guide Introduction A custom tray is a dental impression tray made for one patient’s mouth. It is built from a preliminary cast or model of that patient’s arch, so it fits the individual rather than a standard size. Stock trays come in preset shapes and sizes and often fit poorly. A custom tray gives the impression material a more uniform thickness and better support, which helps the dentist or lab capture fine detail. Lang Dental Manufacturing Company, Inc. offers a Custom Tray category in its dental product line. It includes two product lines: • Instant Tray • Jet Tray This guide covers what custom trays are, where they are used, what to look for in a tray material, and how to choose between product options. Product category page: https://www.langdental.com/products/subcategory/id/2 Custom Tray | https://www.langdental.com/products/subcategory/id/2 Page 1 of 8

What Is a Custom Tray? A custom tray is a rigid or semi-rigid tray fabricated on a diagnostic cast. It is used to take a final, accurate impression of the teeth, the soft tissues, or both. The process usually follows these steps: 1 A preliminary impression is taken with a stock tray. 2 A cast (model) is poured from that impression. 3 The outline of the custom tray is drawn on the cast. 4 Tray material is shaped over the cast, and relief or spacer is added where needed. 5 The tray hardens, then is trimmed, finished and tried in the patient’s mouth. 6 The final impression is taken using the custom tray and an impression material. The main purpose is to hold a controlled, even thickness of impression material. Even thickness reduces distortion and improves the accuracy of the final model. Key characteristics of a good custom tray • Rigid enough to resist flexing during impression taking • Accurate fit to the patient’s arch • Comfortable and well extended, without over-extension • Smooth, trimmed edges • Compatible with the impression material in use Custom Tray | https://www.langdental.com/products/subcategory/id/2 Page 2 of 8

Why Custom Trays Matter in Dental Practice 1. Better impression accuracy A tray that fits the patient supports the impression material evenly. This lowers the chance of voids, pulls and distortions. 2. Efficient use of impression material Because the tray is shaped to the arch, less material is needed, and the layer is more consistent. 3. Improved patient comfort Edges and extensions can be adjusted to the patient’s anatomy, which reduces gagging and discomfort for many patients. 4. Predictable results in complex cases Edentulous cases, implant cases and full-arch restorations often depend on a close-fitting, rigid tray. 5. Fewer remakes A more accurate impression means fewer adjustments, remakes and extra appointments. This saves time for the practice, the lab and the patient. Custom Tray | https://www.langdental.com/products/subcategory/id/2 Page 3 of 8

Common Clinical and Laboratory Uses Custom trays are used in a wide range of dental procedures, including: • Complete dentures: Final impressions of edentulous arches need tissue-supporting trays with proper border extension. • Partial dentures: Custom trays help capture the remaining teeth and the edentulous areas accurately. • Crown and bridge: A rigid tray supports high-precision impression materials used for prepared teeth. • Implant restorations: Open or closed tray techniques often rely on a custom tray for stable, accurate transfer of implant positions. • Study and working models: Custom trays can give higher-quality models than stock trays. Dental laboratories also use custom tray materials to produce trays for dentists, often in volume. For them, handling, working time and consistency matter as much as the final strength of the tray. Custom Tray | https://www.langdental.com/products/subcategory/id/2 Page 4 of 8

Choosing a Custom Tray Material Several factors should guide the choice of tray material. Factor What to consider Working time Enough time to adapt and shape the material on the cast Setting speed Faster setting suits chairside work; slower setting may suit lab workflows Rigidity The tray should not flex or distort during impression taking Dimensional stability The tray should keep its shape after it sets Ease of trimming and finishing Smooth edges and easy adjustment save time Compatibility It should work with the impression material and adhesive in use Handling Mixing, dispensing and shaping should be straightforward When comparing products, read the manufacturer’s directions for use and the Safety Data Sheets. Product details such as mixing ratios, working times and recommended adhesives are listed on the manufacturer’s product pages. Custom Tray | https://www.langdental.com/products/subcategory/id/2 Page 5 of 8

Lang Dental Custom Tray Product Lines Lang Dental’s Custom Tray category currently lists two product lines. Instant Tray This line is listed first in the Custom Tray category. It is aimed at users who want a straightforward way to make custom impression trays. Visit the Instant Tray page for current details, sizes and ordering information: https://www.langdental.com/products/list/subcat_id/1 Jet Tray Jet Tray is the second product line in the category. It is intended for practices and laboratories that fabricate custom trays for their impression procedures. Product details and ordering information are available here: https://www.langdental.com/products/list/subcat_id/2 Tip Compare the two lines on the product pages before ordering. Check each product’s instructions to see which fits your workflow, whether chairside or in the lab. Full Custom Tray category https://www.langdental.com/products/subcategory/id/2 Custom Tray | https://www.langdental.com/products/subcategory/id/2 Page 6 of 8

Best Practices for Making and Using Custom Trays Preparation • Pour a clean, accurate cast from a good preliminary impression. • Mark the tray outline clearly on the cast. • Apply a suitable separating or release agent so the tray lifts off the cast cleanly. Fabrication • Follow the manufacturer’s mixing and handling instructions exactly. • Adapt the material to the cast evenly, with a consistent thickness. • Include a handle that is comfortable to hold and does not interfere with the lips or cheeks. • Allow the material to set fully before removing it from the cast. Finishing • Trim and smooth all borders to protect the patient’s soft tissues. • Check the fit on the cast and in the mouth before the impression appointment. • Apply the recommended tray adhesive in time to dry before the impression is taken, if the impression material needs it. Safety and infection control • Follow all safety guidance in the product’s Safety Data Sheet. • Work in a well-ventilated area when handling acrylic-based materials. • Disinfect or dispose of items according to your clinic’s protocols. Custom Tray | https://www.langdental.com/products/subcategory/id/2 Page 7 of 8

About Lang Dental and How to Order Lang Dental Manufacturing Company, Inc. is a dental materials manufacturer. Its catalog covers many areas of dentistry, including bonding agents, custom trays, denture base materials, denture reline and repair, orthodontic acrylics, provisional crown and bridge materials, small equipment, release agents and solvents. Explore the Custom Tray category https://www.langdental.com/products/subcategory/id/2 Contact information • Address: 175 Messner Drive, Wheeling, Illinois 60090, USA • Phone (US & Canada): +1-800-222-5264 • Phone (International): +1-847-215-6622 • Email: orders@langdental.com • Hours: Monday to Friday, 7 am to 3 pm Central Time • Website: https://www.langdental.com/ Helpful resources on the Lang Dental website: Product Usage, Safety Data Sheets, Marketing Center and Certificates. Conclusion Custom trays help produce accurate impressions, comfortable fit and predictable results. Choosing the right tray material for your workflow saves time and reduces remakes. To view current Custom Tray products, specifications and ordering options, visit: https://www.langdental.com/products/subcategory/id/2 Custom Tray | https://www.langdental.com/products/subcategory/id/2 Page 8 of 8